SUPPORT

* Excersing strict quality control through different stages of productions SIMCO has built a sound reputation for its quality, and by the virtue of the high qualified of our machinery, production capacity and delivery in time as agreement, SIMCO could keep forward by realizing its undertaken.
* Even though we are a distributors of steel pipes, we are really in the business of building relationships.
* Each one of us, regardless his position, must look at each contact as an opportunity to build and strengthen relations.

Tolerances Sizes:
The following tolerances allowed on nominal values of sizes and weight:
* On outside diameter of round section: 1% with a minimum of + 0.5mm.
* On outside profile : +1%
* Max.bend on simple section sides: 1%of side size.
* Straightness of the bar: max.bend 0.25%of the lenght.
* Inside bending radius of the corners: max.2.5 times the thickness.
* Dimensional tolerances are measured at a distant of 100 mm from the ends.

Consignments:
* Unless otherwise agreed, tubes are supplied in marketable lengths of 6000mm (-20 +100mm): 5 % of the tubes may be furnished in lengths ranging from 4000 to 6300mm.
*Tolerance concerning weight is + 0.3% in accordance with the rules of the Italian Metric Institute of Weights and Measurements.
* On the total quantity of the order: + 10%.

Please call on our technical staff for any information regarding particular problems or special tube designs

Opportunity + Ability = Success
Our Principles your advantages